BALM provides high-tech multi-million pound advanced imaging technology. Using the equipment in BALM you will be able to observe, record and analyse your experiments obtaining picture perfect images and cutting-edge scientific insights.
We provide a broad range of equipment and services to suit everyone from experienced light microscopy specialists, to people who have never touched a microscope before. In BALM you will both find the right tools, guidance and friendly support to get the results you need. Don't hesitate to get in contact and get professional advice on the design of your ezperiments.
If you have comments or questions about BALM, or simply need more information and want to contact us, click on the contact tab below.
A list of the cost per hour of equipment.
|Equipment||Cost per hour||Cost per Hour External User|
|LSM510Meta inverted Confocal||£20||£25|
|LSM710 Meta Confocal||£30||£35|
|Spinning Disk||£12 (£80 for overnight)||£15|
|Timelapse||£12 (£80 for overnight)||£15|
|PALM laser ablation||£15||£20|
Technician time, excluding basic training, is charged at £30 hour (£35 external users).
Currently use of image processing is free of charge.
It is possible to pay in advance for a discounted rate.
Charging is based on booking and usage. If you book the equipment from 9am until 12pm but only use it for 1 hour you will be charged for 3 hours. This is because when you book the equipment is reserved for you. If you are 30 minutes or more late for your booking someone else may take your slot but you still pay for the first 30 minutes.
If you overrun your booked time please note this on the calendar, or the BALM staff will amend it for you.
You have 24 hours after your imaging session to amend the calender if you have finished your experiment early or it didn't work. You will be charged for amendments after this time.
Advanced light microscopy is a complex art riddled with technical terms. Here we explain what the terms mean to help you make the right decisions about your experiments.
- The microscope has stopped working!
- Choosing the correct fluorophore
- Confocal versus Epifluorescence
- Magnification and resolution
If the microscope has stopped working properly:
First please don’t panic. 80% of problems with the microscopes can be solved in minutes.
If there is oil on the air lens and your sample looks blurry:
Clean the lens first with 100% Ethanol this should remove the oil
If you have accidentally crashed the objective into your sample:
Please come and tell BALM staff immediately and stop using the microscope. If this happens after hours - switch off the microscope and put a sign on it to warn others.
If the software has stopped working properly:
Check the amount of data you have in your account. If its more than your quota simply delete the old stuff and make more room If you have room but the software isn’t working then quit the software and restart the software If this doesn’t work then switch off the computer, switch off the hardware and reset from the beginning. You will have to wait for the lasers to cool. If you are resetting the system please leave the mercury lamp on.
BALM's mission is to provide an imaging resource for the Blizard Institute and QMUL with cutting edge tools.
Check back here regularly for news and look at the events section of the website to see what is coming up.
The Advanced light microscopy imaging facility is happy to help with all aspects of projects related to imaging. Please do not hesitate to contact us if you have a question, suggestion or a project proposal.
Office: Room LG02 Blizard Building South Basement
Phone: 020 7882 2406
Phone 020 7882 2407
Blizard Advanced Light Microscopy Core Facility
Barts and the London School of Medicine and Dentistry, QMUL
4 Newark Street
London, E1 2AT